Skip to content

Bathtub Cleaning: Steps Guide, Tips and Tools

After spending a tiresome day in the office, you want to soak yourself in a nice warm bath. It will help to invigorate yourself so that you can spend some cozy moments with your near and dear ones. But if your bath is full of dirt, don't you feel irritable and want to clean it right away?

Cleaning your bathtub may be an arduous task for you. However, with the right tool and proper washing technique, you can do it easily without the help of a professional. According to a homemaker, "I use the electric spin scrubber to clean my bathtub every weekend. Believe me or not, the results are just overwhelming. It helps me save my precious time."

Do you want to experience something like this? Before that, you should have a clear idea of a few basic things.

bathtub

Things to prepare for cleaning the bathtub:

  • Electric spin scrubber
  • Rubber gloves
  • Rotating scrub brush
  • All-purpose spray cleaner
  • Paper towels

How to clean the bathtub – Step-by-step guide

electric bathroom scrubber

Step  1

You need to remove anything and everything that may hinder your cleaning. It may include candles, shampoo bottles, bath toys, etc.

Step – 2

Rinse the bathtub with hot water and spread some all-purpose cleaner throughout the entire bathtub. Leave it for 15-20 mins to sit.

Step  3

Now take the electric spin scrubber and rinse your bathtub well. The rotating scrub brush of the scrubber will provide maximum cleaning. Ensure you have checked the corners well, as this area may have water stains that need to be removed.

Step  4

Once the scrubbing is done, pour some hot water again into the bathtub and wait till the entire water drains.

Step  5

Now, take the paper towels to dry the bathtub. It will help to eliminate any watermarks.

Step  6

If there are still limescale deposits and soap scum, you need to put some extra effort into it.

Spray the all-purpose cleaner onto the tub's surfaces until it's wet. Let it sit for a few minutes. Now, use the bathroom spin scrubber to wash the entire tub. Rinse thoroughly and repeat the same if necessary.

You may be anxious about the limescale deposits over your expensive faucets. Mix the lime, calcium, rust remover, and water. Now, spray the solution to the limescale deposits. Let it sit for a few minutes. Scrub it with a brush. You can also use a cordless power scrubber. Once done, rinse the same with warm water.

Step  7

Once done with the bathtub, you should use the window cleaner on the faucets to make it sparkling shine. Spray the window cleaner on the faucet parts and wipe the same with a dry towel.

clean the bathtub with electric spin scrubber

How should you clean your bathtub based on the type of tub?

Varying cleaning procedures might have different impacts on the bathtub depending on the material used to make it. Some materials are easier to clean than others, while others may take longer and need more work. Let's have a look at some of the most prevalent materials used to create bathtubs.

1. Acrylic bathtub

Acrylic bathtubs are popular nowadays because of their adaptability, durability, variety of choices, and cost-effectiveness. The acrylic tub is constructed from vacuum-formed acrylic sheets bonded with fiberglass. They have a non-porous surface that may be restored to a certain extent if damaged. They're available in a variety of colors, shapes, and sizes.

Cleaning tips

Before cleaning the bathtub, fill it with warm water and soak it.

Using a moist rag or piece of cloth, massage the bathtub's surface in circles with a tiny bit of baby shampoo.

Rinse the rag frequently since soap might build upon it. Rinse the bathtub's surface and continue the process until you believe it is clean and clear of spots.

Allow a few minutes for the area to dry before buffing the bathtub's surface with a dry cotton ball.

2. Porcelain-enameled steel bathtub

Porcelain-enameled steel is a popular and very affordable alternative for bathtubs. Bathtubs made of this material are often heavier than acrylic or fiberglass. They are exceptionally long-lasting and straightforward to clean.

Cleaning tips

Do not use abrasive cleaners, scouring powders, white vinegar, and wire balls to clean porcelain baths as they can damage the surface.

Using a sponge or rag, put a couple of teaspoons of dishwashing soap into a gallon of hot water and scrub the bathtub's surface.

Scrub the porcelain and thoroughly rinse it.

3. Enameled cast iron bathtub

An enameled cast iron bathtub is a bathtub composed of enameled cast iron that is exceptionally sturdy and hefty. It's composed of molded iron and has an enamel finish. It is more expensive than other bathtubs, but this adds to its durability and longevity.

Cleaning tips

Handle an enameled cast iron with care, since using toxic chemicals might cause it to discolor. It is highly recommended to mix baking soda with warm water for daily cleaning.

Apply a paste made of baking soda and warm water on the spots.

Allow the paste to settle for about 30 minutes.

Scrub the muck and grime using a cleaning rag.

Rinse well with warm water.

Wrapping it up

Cleaning your bathtub won't be that tough if you follow these tips. However, we recommend using the electric spin scrubber while cleaning your bathtub. At Tilswall, we have high-quality scrubbing brushes that could be your helping hand. For more information, visit our website now.
Previous article How to Clean Hardwood Floors Quickly and Deeply?
Next article How to Clean Your Oven: A Step-By-Step Guide