Powertech Mills & Controls Pvt. Ltd. is a well-known manufacturer of Compact Substation manufacturer. Compact Substation manufacturers in India( CSS) The prefabricated compact substation is one kind of compact complete set of distribution outfits designed to combine medium voltage switchgear, low voltage switchgear, distribution motor, energy metering bias, and reactive power compensation bias into one or several boxes according to a certain wiring scheme. It's suitable for three-phase AC systems with a rated voltage of 11KV or 33KV for line and distribution of electrical energy. With the advantage of compact size, the prefabricated compact substation was extensively used in the three phases of the power distribution system with the voltage standing from 11kV to 33kV for electricity distribution. The protection degree reached IP55, so it could be installed out-of-door by enwrapping the small area. CSP( fully Self defended) TransformerCSP( fully Self defended) Motor We're an excellent Compact Substation manufacturer in India. The standard range is 160 KVA to 1600 KVA 11 & 33 KV voltages class. Features Designed for inner installation close to their point of use at the center of the major cargo consumers. These mills are combined with their primary and secondary switchgear and distribution boards into compact substations that are installed directly at their point of use. This reduces construction conditions, string costs, transmission losses, and installation costs. The motor is fitted with three temperature detectors installed in the LV winding, and a solid-state tripping device with a relay affair. It can be mounted on a rooftop( for dry type motor) where you want the power force. Specification Designed to give conservation-free long-lasting operation for a minimum of 20 times. Sot-type epoxy resin cast or vacuum saturated or motor. VCB or SF6C.B whichever is suitable for protection from theH.V side with all necessary guarding relays, CTs, PTs, etc. LBS switch for making or breaking contact from theL.V side press for protection of all the internal bias from environmental strokes. The prefabricated compact substation adopts the advanced designing idea, so the appearance is beautiful and the size was optimized to be1/10 of the same capacity power substation.
